Towbar : IMIOLA Flange ball Towbar incl. 7 pin universal multiplex wiring kit

CAMPING CAR Bavaria

Flange ball Towbar incl. 7 pin universal multiplex wiring kit

Attache remorque à boule classique CAMPING CAR Bavaria V630

Faisceau attache remorque CAMPING CAR Bavaria V630

faisceau multiplexe CAMPING CAR Bavaria V630

faisceau 7 broches CAMPING CAR Bavaria V630

faisceau attelage CAMPING CAR Bavaria V630

417 €

In stock Available

Ref : CS7/018CC4_UNIKIT1L

Lifetime warranty
Pay in 3 instalments

Quantity : -+

Towing capacity (in kg)	3000
Vertical load (in kg)	100
Removable	AVEC OUTILS
Bumper cut's
Bumper removal

FLANGE BALL TOWBAR IMIOLA

The classic IMIOLA Flange ball Towbar (with standard angled ball) is a practical and economical solution. This coupling system is very popular with professionals as it allow any type of accessory to be fitted on a ball or screwed plate and the ball is adjustable in height via its screwed plate.

Here the coupling includes a universal ball joint in square (90°) with a 50mm diameter (universal diameter).

The screwed plate fixed on the Towbar will allow you to adapt all types of trailer coupling accessories such as:

Finally, the ball joint is more robust, which allows you to tow heavier loads than with a conventional Towbar.

7-PIN + ELECTRONIC BOX FOR MULTIPLEX VEHICLE

The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.

The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.

You also have a picture of the assembly instructions. The approximate time to assemble a wiring kit is about 15-30 minutes.

WIRING KIT CHARACTERISTICS

Number of pins	7
Reprogramming	No
Compatibility Bulb	Alltypes : traditional, LED, à dual intensity
Output protections	- outputs protected against short circuits -Reverse polarity protection -IP50 Protection
Pre-mounted terminal on the box	Yes
Warranty	2 years

The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
In addition, the wiring kit does not affect the operation of the reversing radars.
The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).

BENEFITS AND SECURITY

Flange ball Towbar

The IMIOLA Flange ball Towbar has a lifetime warranty
Ideal for commercial vehicles and their towing accessories
The shape of the "angled" ball allows the adaptation of regular pintle hook, Combination Pintle Hook as well as Jaw and Pin coupling or towing heads
Allows you to tow a maximum load with your Towbar
Designed for professionals, this Towbar allows you to adapt any type of accessory on a target plate
The ball joint can be removed with tools (2 HM16 bolts to remove)
The flange ball towbar has an excellent value for money
100% European manufacture
Complies with the European standard 94/20
The ball joint is solidly fixed on the Towbar thanks to 2 large HM16 screws or 4 medium HM10 screws
IMIOLA guarantees its Towbars for a period of 3 years
Products tested by the PIMOT laboratory (Institute of Automotive Industry)
Its towbars are designed and tested according to the E20 standard
Allows you to tow a maximum load with your Towbar

Electrical kit

Supplies electricity to the lights on your trailer and bike carrier
No reprogramming required
Fits all non-multiplexed vehicles
Supplied with 2400mm sheathed wires
Power wire (more permanent) is 5.5m long

TUV certification : ISO 9001:2008 system certificate

IMIOLA towbars comply with all current European standards. If you would like to find out more about certifications, standards and guarantees for IMIOLA hitches click here.