ADD TO CART

Towbar Fiat DUCATO - Fourgon Type 250 from 06/2006 to 01/2011 : Fixed flange ball Towbar incl. 7 pin universal wiring kit GDW 

  1. Fiat
  2. DUCATO - Fourgon
  3. From 06/2006 to 01/2011

Fiat DUCATO - Fourgon

Fixed flange ball Towbar incl. 7 pin universal wiring kit

Fixed flange ball Towbar incl. 7 pin universal wiring kit

-+
Towing capacity (in kg) 3000
Vertical load (in kg) 150
Removable AVEC OUTIL
Bumper cut's
Bumper removal

Fixed flange ball Towbar GDW

Specialised in the manufacture of towbars since 1965, BOISNIER GDW has put all its expertise into the design of this fixed flange ball towbar.
The fixed flange ball Towbar is specifically designed for your vehicle model. The shape of the ball joint is angled, the holes are universal in size (diameter 16.5 mm with 90 mm centre distance).
This robust towbar will allow you to safely tow your trailer, caravan or bike carrier without breaking the bank.
The screwed plate fixed on the Towbar will allow you to adapt all types of trailer coupling accessories such as:
  • Regular Pintle Hook
  • Combination Pintle Hook
  • Jaw and Pin Coupling
Finally, the towbar complies with the European R55/ECE standard, which is a real guarantee of quality and safety.

7 pin wiring kit + electronic box for multiplex vehicle

The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.
The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.
You also have a picture of the assembly instructions. The approximate time to assemble a harness is about 15-30 minutes.

WIRING KIT CHARACTERISTICS

 
Number of pins 7
Reprogramming No
Light Bulb Compatibility All types: traditional, LED, double intensity
Output protection - outputs protected against short circuits
- Reverse polarity protection
- IP50 protection
Pod pre-mounted on the box yes
Warranty 2 years


The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
In addition,the wiring kit does not affect the operation of the reversing radars.
The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).

Benefits ans Safety


Fixed flange ball Towbar
  • Designed specifically for your vehicle
  • Your Boisnier GDW Fixed flange ball Towbar has a lifetime guarantee
  • Product made in France
  • Ideal for utility vehicles and their towing accessories
  • The shape of the "angled" ball allows the adaptation of regular pintle hook, Combination Pintle Hook as well as Jaw and Pin coupling or towing heads
  • The Fixed flange ball Towbar has an excellent value for money
  • Detailed instructions
  • Allows you to tow a maximum load with your trowbar
  • A second coat of grainy paint is applied to the towbar to prevent oxidation of the fitting and the vehicle
  • Hole centres and alignments are designed specifically for your vehicle
  • Complete kit (including bolts)
  • Stable and fixed towbar
  • Approved to European standard EC94/20 with attachment to the intended anchor points
  • The ball is firmly attached to the towbar with 2 large HM16 screws
  • BOISNIER GDW guarantees its trowbar for a period of 3 years
  • Certified ISO 3853/ISO 1176/ISO 1103
Wiring kit
  • Allows you to supply electricity to the lights of your trailer and bike carrier
  • No reprogramming required
  • Fits all multiplexed vehicles
  • Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
  • Power wire (more permanent) is 5.5m long

BOISNIER GDW towbars comply with all current European standards. If you would like to know more about the standards, certifications and guarantees of BOISNIER GDW towbars click here.

Content of the pack

Angle ball joint
Fitting Bolts and nuts Wiring kit holder
Ball joint cover
Assembly instructions
7-pin wiring kit + V7 relay box + Fixing + Assembly instructions
 

Customers who bought this article were also interested in :

 

EXPERTS AT YOUR SERVICE SINCE 2013

Paiement sécurisé Visa - CARPRATIK Paiement sécurisé MasterCard - CARPRATIK Paiement sécurisé CB 3x Société générale - CARPRATIK
In the same theme : bike carrier at low prices - bike carrier towbar attachment - trailer hitch - towbar - Combination Pintle Hook - specific wiring kit - universal wiring kit - swan neck towbar - detachable towball